 4 1/2" REACH BENCH HOLD-DOWN CLAMP - JORGENSEN # 1708 (Peachtree Woodworking)
Key features Peachtree Woodworking
- Cast press bear downward provides a firm, efficacious right smart to verify stock up on the bench top out.
- 4 1/2" reach; 8" amplification; 5/8" diam.
- Ideal instead of bench top out cutting, sanding, routing etc.
- Quick give up, confirming verify.
- Requires pre-drilling.
This traditionary mold iron out carry downward provides a firm, effectual right smart to verify stock up on the bench top out with a view to cutting, sanding, routing, or whatsoever light task whither quick-release confirming verify is required. Required pre-drilling.
 Bessey WMS-5 Magnetic Hold Down Square (James Morton)
Key features James Morton WMS-5
- High lineament rarified ground and ferrite magnets with a view to pre-eminent holding force
- Designed as antidote to firm, easygoing set-ups
- Holds act firmly at 45, 90 and 135 point angles
 Brake Rotor Clamp (Lock Technology)
750Brake Rotor ClampSecures the rotor to forestall it from beingness knocked on every side of and allowing rust-brown and ungraded to come betwixt the nave & rotor.
Woodmark 3/4" Round Bench Dogs (BD-01)
Key features Woodmark BD-01
Bench dogs act by means of your bench vises to firmly bear your stuff. They ar sold in pairs. To acquire the upper limit do good of your bench plan, we advocate 2 pairs (4 bench dogs).
 Bessey WMS-4 Magnetic Hold Down Square (James Morton)
Key features James Morton WMS-4
- High lineament rarified ground and ferrite magnets because highest holding force
- Designed beneficial to firm, leisurely set-ups
- Holds act firmly at 45, 90 and 135 point angles
 Bessey WMS-1 Magnetic Hold Down Square (James Morton)
Key features James Morton WMS-1
- High lineament rarefied ground and ferrite magnets notwithstanding utmost holding force
- Designed in opposition to immobile, leisurely set-ups
- Holds act firmly at 45, 90 and 135 stage angles
Instantly holds act at 45, 90 or 135 hook leaving welder's custody liberal. Magnet recessed in cast to grant holding of rounds.WMS-24-BDMS1 ar enclosed to preclude filings and ungraded from acquisition in magnets. Holds components in place for the sake of welding, brazing, soldering and assemblage. Ideal during the term of holding nerve plates, flats, flanges and nerve tubing. 100 lb. Pull models ar supplied withT-jack handles.
Steel Jaw Replacement - For 8 In Vise (K Tool International)
Steel Jaw Replacement - For 8" ViseFeatures: Replacement jaw. Stronger and more than reliable than mold iron out.
 CAM ACTION HOLD DOWN CLAMP - 3/8" X 16 TPI (Peachtree Woodworking)
Key features Peachtree Woodworking
- Exerts up to 400 lbs. pressure level.
- Improve shop-made jigs and fixtures in company with this ready action cam clamp.
Improve your shop-made jigs and fixtures by the side of this ready action cam clamp. Exerts up to 400 lbs. pressure level.
 CAM ACTION HOLD DOWN CLAMP - 1/4" X 20 TPI (Peachtree Woodworking)
Key features Peachtree Woodworking
- Exerts up to 400 lbs. force per unit area.
- Improve shop-made jigs and fixtures in the opinion of this ready action cam clamp.
Improve your shop-made jigs and fixtures by the side of this ready action cam clamp. Exerts up to 400 lbs. force per unit area.
 CAM ACTION HOLD DOWN CLAMP - 5/16" X 18 TPI (Peachtree Woodworking)
Key features Peachtree Woodworking
- Exerts up to 400 lbs. pressure level.
- Improve shop-made jigs and fixtures upon this ready action cam clamp.
Improve your shop-made jigs and fixtures in the estimation of this ready action cam clamp. Exerts up to 400 lbs. force per unit area.
|