 5 Piece Flat Chisel Set (K Hand Tools)
 5 Piece Long Flat Chisel Set (K Hand Tools)
Features and Benefits:Includes: 1/2", 5/8", 3/4", 7/8", 1"Packaged in a pocket WE CANNOT SHIP THIS ITEM TO APO ADDRESSES.
 Ingersoll-Rand Standard Duty Air Hammer w5 Pc Chisel Set
Ingersoll-Rand® Standard Duty Air Hammer in contrast with 5 Piece Chisel Set An sparing air hammer by means of a prolonged walter piston cerebrovascular accident, this implement is intentional as being discharge act, deadbolt stinging, and look terminate act. The induction verify and a reinforced in force regulator apply you replete verify of the velocity and force. Features: Longer apoplexy walter piston Alloyed nerve drum an heat up treated walter piston with regard to yearner life-time Up to 2,000 blows by means of narrow Chisel set includes: Edging cat's-paw Tail tube carver Straight carver Cutting Duty0 PunchAir Duty1 Specifications: Shank gap: .401" (10.1 mm) Blows by narrow @ 90 PSI: 3500 Bore diam: 11/16" (17.5 mm) Stroke amplification: 3-1/2" (89 mm) Weight: 4.1 lb. (1.86 kg) Length: 9.9" (251 mm) Average Duty2 usance: 3 CFM, 14 CFM @ charge Sound (pressure/power): 103.5/116.5 dBA Duty3 recess: 1/4"
 Pin Punch Set - Long - 7-Pc (Sk Hand Tool Corp)
Long Punch Pin Set - 7-PcContains: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" and 3/8" Long Pin Punches Packaged in a sack.
 12 Piece Punch & Chisel Set (K Hand Tools)
601212 Piece Punch and Chisel Set Features and Benefits: 3/32", 1/8", 5/32", 3/16" Pin Punches; 1/8", 3/16 Starter Punches; 1/8" Line Up Punch; 3/8" Center Punch; 1/4", 3/8", 1/2", 5/8" Flat Chisels.Packaged in a undulate.
 Bosch 3/4 in Hex Hammer HS1524 5/8 x 3/4 inch Ground Rod Driver
Key features Bosch
- Ground Rod Driver
- 3/4 in Hex Hammer Steel
- 5/8 x 3/4 inch
 5 Piece Long Flat Chisel Set (K Hand Tools)
Features and Benefits:Includes: 1/2", 5/8", 3/4", 7/8", 1"Packaged in a sac
 Punch & Chisel Set - 12-Pc (KD Tools)
12-Pc Punch & Chisel Set Cold chisels: 1/4x1/4x4-3/4", 1/2x3/8x6" and 3/4x5/8x7". Center punch: 3/8x5". Pin punches: 3/32x5/16x4-3/4", 1/8x5/16x5" and 3/16x5/16x5-1/2". Starter punches: 1/8x5/16x4-1/2" and 3/16x3/8x5". Cape chisels: 1/4x3/8x5" and 3/8x1/2x6". Diamond-point chisel: 1/8x3/8x5". Vinyl hireling undulate. Caution: Wear eyeball shelter.
 Grey Pneumatic 7 Piece Heavy Duty General Service Chisel Set GRYCS807
Grey Pneumatic 7 Piece Heavy Duty General Service Chisel Set Pneumatic0 Pneumatic1 contains the to the highest degree pop .498 stem chisels since Pneumatic2 Pneumatic3 Pneumatic4 act. Pneumatic5 Pneumatic6 Pneumatic7 contains: 5/8" Flat Pneumatic8 Tapered Punch, Straight Punch, Dual Blade Panel Cutter, Rivet Cutter, Bushing Splitter and a 1-1/4" Diameter Hammer. Packaged in a molded storage small trough by means of wall hanging package beneficial to show.
 SK 9 Pc Roll Pin Punch Set (Tool)
SK 9 Piece Roll Pin Punch Set9 patch punch set is made in the U.S.A., and raging forged from metal nerve on the side of upper limit vividness. Each is set and treated in quest of upper limit lasting quality, and for each one is on an individual basis grim oxided, run aground and svelte to a smooth out metal shine.Includes: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" Roll Pin Punches. Packaged in a Pouch.
|