 KD Tools (KD 33130) Drift Punch 5/32 x 1/2 x 8-1/2in.
 Northern Industrial Tools 16-Piece Punch & Chisel Set
Key features Northern Industrial Tools
- Diameter of Punches: 1/2in.
- Starter Punch Sizes: 3/32in. x 5 1/4in. , 5/32in. x 6in., 1/8in. x 5 3/4in., 3/16in. x 6 1/4in. and 1 1/4in. x 6 3/4in.
- Pin Punches: 3/32in. x 4 1/4in., 1/8in. x 4 3/4in., 5/32in. x 5in., 3/16in. x 5 1/4in and 1/4in. x 5 3/4in.
1 chisel standard of measurement, 5 stick punches, 2 midway punches, 5 dispatcher punches, and 3 monotone chisels. Storage wooden vessel non included.
 Chisel&Punch 12Pcs 2.5Kgs/Gray Ph. (ToolShopUSA)
Key features ToolShopUSA
- Drop-forged Steel
- 6-Flat Chisel: 170x10x13(mm), 180x12x16(mm), 200x14x19(mm), 200x16x22(mm),
- 250x18x24(mm), 250x18x24(mm)
- 3-Taper Punch: 150x10(mm), 250x12(mm), 250x18(mm)
- 1-Straight P
Brass Punch - 5/8 In (K Tool International)
Brass Punch - 5/8"Features: Knurled palm.
 Bosch HS1518 3/4 in Hex Hammer Steel 1 x 18 inch Flat Chisel
Key features Bosch
- Flat Chisel
- 3/4 in Hex Hammer Steel
- 1 x 18 inch
Bosch HS1516 3/4 in Hex Hammer Steel 18 inch Bull Point
Key features Bosch
- Bull Point
- 3/4 in Hex Hammer Steel
- 18 inch
 Line-Up Punch - 1/2In x 18In (Mayhew Tools)
Line-Up Punch - 1/2In x 18In For positioning holes in metal pieces through and through that rivets, pins or bolts ar inserted. Do non habituate in quest of impulsive. Forged from the highest lineament metal nerve. Black Oxide destination. Full stem heat-treated notwithstanding upper limit nervous diction and durableness. Made in U.S.A.
 KD Tools (KD 33201) Brass Pin Punch 3/8 x 6in.
Taper Punch - A-046074 (Chicago Pneumatic Co Parts)
Taper Punch - A-046074
 Cold Chisel 5/8 x 3/8 x 6-1/2in (KD Tools)
Features and Benefits:5/8" fee, 6-1/2" extent, 1/2" bewitch For superior general resolve edged and chipping
|