 Cooler Motor - 1/2 HP 2 Speed (Dial Manufacturing, Inc.)
Key features Dial Manufacturing, Inc.
- Continuous Air Over, Set Rotation 1.0 Service Factor, Automatic Overload Protection
- 1/2 HP, Two speed, 1725/1140 RPM, 56z Nema Frame, 115 Volts, 8.5 Full charge amps
- Counter clockwise revolution, Sleeve charges
 1/85hp 2950RPM CW 115 Volts (Evcon) Fasco # K629
Key features Fasco
- .67 Amps 115 Volts 60 hz.
- Shaft: 1/4" x 1.1" Rotation = Clockwise
- Mounting: Threaded Holes
- Motor Length Less Shaft = 4 5/8"
- 1 Year Manufacture Warranty
Cross Reference Information: Evcon 7102-2187
 1/15hp 1550RPM CCW 3.3" Diameter 208-230 Volts (Bohn) Fasco # D1125
Key features Fasco
- .4 amps @ 230 Volts 60hz.
- Shaft: 5/16" x 2 5/8" Rotation = Counter Clockwise
- Belly Band Mount or Stud Mount
- Special low-toned degree of heat oil color, motor has electric cord in the estimation of molded secure.
- 1 Year Manufacture Warranty
Cross Reference Information: Bohn 7190-0442; Application Information Condenser Fan, Cooler: Evaporative, Cooler: Walk-In, Display Case: Refrigerated, Refrigeration Fan. Motor Length Less Shaft = 3.75"
 G.E. 1/2 H.P. A/C Condenser Fan/Heat Pump Motor (General Electric)
Key features General Electric
- Single Phase, Permanent Split Capacitor - Shaft Up or Down Application
- 1/2 Horsepower, 1 Speed, 1075 RPM. 208-230 Volts, 60 Hertz., 3.7 Full charge amps.
- 26" Motor leads, 39 Frame sizing
- Totally Enclosed Air Over
- Sleeve charges, Reversible revolution
 Electric Gear Motor 12v Low Speed 50 RPM Gearmotor Dc (Wondermotor PN01007)
Key features Wondermotor PN01007
- 11.5 N-m (8.5 ft-lb) of torque
- 13.5 vdc
- 50 RPM
- 60 Watts
- M6 drive in mounting holes
This is a trademark young electric gear motor that has super high-pitched torque to palm divers heavy-load applications. The specifications ar listed infra: Rated Voltage: 13.5 VDC Rated Speed: 50 RPM Rated Load: 60 Watts Rated Torque: 11.5 N-m (8.5 ft-lb) Mounting: M6 drive in holes Shaft: 10mm scape by with the help of 2 flats whither monotone to monotonous is 6.6mm and threaded terminate to set a M6 tightening nut
 Electric Gear Motor 24v Low Speed 50 RPM Gearmotor Dc (Wondermotor PN01107)
Key features Wondermotor PN01107
- 24v
- 50 RPM
- 60 W
- High torque
- Low speed
This is a brandmark young electric gear motor that has passing high-pitched torque to palm numerous heavy-load applications. The specifications ar listed infra: Rated Voltage: 27.0 VDC Rated Speed: 50 RPM Rated Load: 60 Watts Rated Torque: 11.5 N-m (8.5 ft-lb) Mounting: M6 drive in holes Shaft: 10mm scape attending 2 flats to what monotone to monotone is 6.6mm and threaded terminate to primed a M6 tightening nut
 Carrier BDP Draft Inducer Furnace Motor (P251-2916, 825150360, JA1M086N) AO Smith # 579
Key features AO Smith
- Shade Pole, 1-Speed
- 1/50hp, 3300 RPM, 1.4 amps, 115 volts
- Rotation = CCWLE
- scape 5/16" x 2.25"
- 1 Year Manufacture Warranty
 Centrifugal Blower 115 Volts Fasco # B24220
Key features Fasco
- 2600RPM Shaded Pole Blower
- 1.3 amps @ 115 Volts 60hz.
- Name Plate CFM 135
- 1 Year Manufacture Warranty
CLICK ON "see More Pictures" in favor of dimensional drafting of building block.
 Fasco D365 General Purpose Motor (Motors)
Key features Fasco Motors
- 3.3" Diameter General Purpose Motor
- Shaded Pole - Open Ventilation - Air-Over
- 1/25 Hp, 115 Volts, 1500 Rpm, 1 Speed
- Shaded Pole , Open Ventilated
- Double Shaft, Sleeve Bearings
 1/36hp 3100RPM 3" Diameter 12 Volts DC Fasco # DC141
Key features Fasco
- Electrically Reversible - 4.5 amps @ 12VDC
- Shaft: 1/4" x 2"; Motor Length: 2 5/8" to a lesser extent Shaft
- Stud Mount - Bolt Circle = 2.3"
- Application: School Bus Heater
- 1 Year Manufacture Warranty
Torque = 9.0 oz. in.
|