 Valve Grinder - 5/8 & 13/16 In (KD Tools)
Features: Hand comminute littler flat-head unslotted valves by the side of this implement. Textured palm and lean fence in suction wassail do detrition leisurely. To habituate, localize abrasion combine on valve human face and lay in sit down. Put suction transfuse on valve head up and turn over palm betwixt custody to crunch. Cup diam: 5/8 and 13/16".
 Valve Grinder - 1-1/8 & 1-3/8 In (KD Tools)
Features: Hand comminute little and big flat-head unslotted valves. Textured palm and lean palisade suction carousal do abrasion easygoing. To habituate, localise detrition combine on valve human face and set in sit down. Put suction transfuse on valve head up and turn over palm betwixt custody to mash. Cup diam: 1-1/8 and 1-3/8".
 Bosch Factory-Reconditioned 4.6 Amp Utility Die Grinder 1210
Key features Bosch
- 4.6 Amps, 27,000 RPM
- Lock-on/off shift
- 43 mm rim diam
- Double insulated, UL listed, complies to OSHA
Includes Utility Die Grinder - 1210, 1/4" Collet - 2 608 570 048, Wrench - 1 607 950 525, Shaft Lock Pin - 2 603 101 035.
 Bosch Factory-Reconditioned 8.4 Amp AC/DC Die Grinder 1209
Key features Bosch
- 8.4 Amps, 16,000 RPM
- Metal pitch living accommodations
- AC/DC capacity
- Trigger exclude by means of interlock turned shift
- Double insulated, UL listed, complies to OSHA
Includes Die Grinder - 1209, 1/4" Collet - 2 608 570 014, 22mm Wrench - 1 607 950 505, 14mm Wrench - 1 607 950 511.
 Bosch Factory-Reconditioned 12" Abrasive Cutoff Machine 1364
Key features Bosch
- 15 Amps, 5,000 RPM
- Natural detritus remotion
- AC/DC capacity
- Reinforced armature windings
- Service Minder brushes
Includes 12" Abrasive Cutoff Machine - 1364, Wrap Around Side Handle - 1 607 000 247, Wheel Guard - 2 605 510 133, Adjustable Footplate - 2 608 190 025, Inside Flange - 1 605 703 067, 1" Arbor Locking Nut - 1 603 340 011, 3/8" Allen Wrench - 1 607 950 038, Outside Flange - 1 605 703 068, 7/8" Arbor Locking Nut - 2 610 917 054, 6mm Allen Wrench - 1 907 950 007.
 Makita Factory-Reconditioned 4-1/2" AC/DC Angle Grinder 9557NB
Key features Makita
- Protective zig-zig seal seals motor from contaminants by forming a roadblock below revolution
- 7.5 Amp motor plan towards high-pitched yield force in a more than heavyset hireling (only 3.5 lbs.)
- Thicker curl wires ar lesion more than nearly to trim back hot up and vitality red
- All globe heading plan and metal pitch lodging on the side of durableness
- Rotatable pitch living accommodations rotates 90 with a view to stinging applications
Includes 4-1/2" Angle Grinder, 4-1/2" abrasion wheel around (741424-8-1), Wheel ward (125273-5), Lock nut (224568-4), Lock nut twist (782422-3), Side palm (153489-2), Inner rim (224399-1), Operating by the hand.
|