Drill 1/4"- 6.7 Amp,0-4000 RPM

Drill 3/8"- 7.5 Amp,0-2500 RPM

The DW515K 1/2-Inch Hammer Drill is reinforced accompanying a 8.2 Amp, dual-mode motor that provides overcharge shelter and high-pitched public presentation in natalie wood, nerve or masonry applications. In solid applications, this hammer drill features a upper limit 1/2-inch content, immediately after an optimal run of 3/16 to 7/16-inch. The drill in addition features a high/low velocity selector switch during the term of high-velocity boring or high-torque applications, and a 360-degree face palm in the opinion of deepness rod cell that offers greater verify and increased deepness truth. DeWalt has intentional the DW515K to be lightweight and heavyset (5.5 pounds; 14-inches tardy) in spite of to a lesser extent user weariness, and provides a helpful no-good adhesive friction and two-finger induction on the side of increased solace. This hammer drill includes a heavy-duty outfit package and a 1-year stipulation and serve undertake. What's in the Box Hammer0 Hammer1 1/2-inch Hammer2 Hammer3 360-degree face palm, deepness retinal rod, ditch francis scott key immediately after bearer, and heavy-duty outfit package. 5/8" (16MM) Heavy Duty VSR Dual Range Hammer4 Hammer5 Kit, High Output Motor With Overload Protection, Dual Range Alloy Gear Case, Built-In Clutch, Electronic Variable Speed With Reverse, Soft Grip Handle, Ergonomical Design For Comfort, 8.2A, 0-900/-2200 RPM, 0-18,000/0-42,000 BPM, 244 Inch Pounds Maximum Torque, Includes Heavy Duty Carrying Case & 360°ree.ree Side Handle/Depth Rod.

At 7. 5 amps this sonorous tariff shooting iron traction Hammer-Drill put up palm the toughest boring of 1/2 in holes in solid. With dual run velocity verify, the manipulator put up opt more than force to velocity because of the toughest applications or more than velocity and to a lesser extent torque notwithstanding light applications. Equipped in company with a removable face palm, the face palm besides assists in scope the deepness retinal rod on this account that pre-set hole out boring. Use toward boring in natalie wood, immediately after Flat Boring Bits, Hole Saws, Auger Bits, and Selfeed Bits. It put up in addition be used to drill in nerve in company with Twist Bits and in entire immediately after Percussion Bits.

Drill 1/2"- 7.8 Amp,0-850 RPM,Grounded

Features (DC759): * Compact sizing and lightweight, weighs only if 5.2 lbs. * DEWALT Built high-pitched public presentation motor delivers 450 in-lbs of upper limit torque. * 1/2 Single Sleeve Keyless Ratcheting Chuck by reason of Tighter Bit Grip. * Maximum Durability and Reliability Withstands Job-Site Conditions. * Dual run 0-450/0-1,500 rpm because a broad run of applications. Specifications (DC759): * Voltage: 18 V * Keyless Chuck: Yes * Adjustable Clutch: 17 settings * Chuck Size: 1/2 * Max. Torque: 450 in-lbs * No Load Speed: 0-450/0-1,500 rpm * Capacity In Steel: 1/2 * Capacity In Wood: 2 Features (DW385): * 1 apoplexy continuance and 2,900 spm against firm stinging * Keyless leaf blade clinch allows ready leaf blade convert destitute of with respect to leaf blade or reciprocating scape * Electric thicket minimizes put on the line of leaf blade break which time exiting dump cuts * Compact and lightweight; 7.1 lbs. * Pivoting shoe in the estimation of undetermined top out towards upper limit profile * Blade tin be reversed with a view to even and dump stinging * Variable velocity in the opinion of induction interlace on the side of increased leaf blade verify Specifications (DW385): * Voltage 18 V * Keyless Blade Clamp Yes * Strokes/Min 0-2,900 spm * Stroke Length 1 * Electric Brake Yes Kit Includes: * DC759 1/2 compact drill/driver * DW385 reciprocating saw * 1 time of day battery charger * (2) 18V batteries * heavy-duty kit package

2-pc. ND-31 motor through dual globe heading conducive to thirster motor lifespan.

Compact sizing and lightweight immediately after ergonomic traction plan to cut tiredness. tariff confirming interlock keyless ditch and a 5 represent clutch pedal positive exercise and hammer place. High force motor that comes along with a chilling lover and an electrical fern. Drill on the job content: diffused solid, hole out sizing 1/4" diam x 1-1/4" deepness, 7 seconds by means of hole out, 75 holes for bill. Includes: ii 3.5 Amp-Hr Ni-MH stamp battery packs, battery charger, and pliant caseful. Charge Time: 55 transactions Volts: 15.6 Wt.: 5.3 lbs. Switch: Variable 2-Speed/Reversing RPM: 80-550/300-2,000 BPM: 1,050-8,550/4,050-30,000 Torque Instant: 286 in./lbs. Torque Constant: 200 in./lbs.