 10 TON FLOOR CAPACITY FLOOR PRESS (OTC)
Key features OTC
- Adjustable press bottom tallness of from 6 in. to 36 in.
- Horizontal "daylight" of 22 in. to palm big urgent jobs
- OTC serial two-speed hydraulic deal interrogate, consummate along with hose down and fittings
- OTC serial publication 10-ton hydraulic ram down has a 10 1/8 in. apoplexy
- Press floor blank is 28 in. x 25 1/4 in.
 Air Hydraulic Shop Press 20 Ton (ToolShopUSA)
Capacity: 20Tons, Working Range: 0-988mm, Air Inlet Fitting: 1/4" NPT, Stroke: 190mm, Bed Width: 545mm, Air Pressure: 120-200PSI
 ICS Flow Adapter Valve Kit (12 gpm)
Key features ICS
- Flow Output: 12 gpm (30 liters/min). Pressure Relief Setting: 2,500 psi (172.5 bar).
- Manifold Size: 5-1/2 in. x 5-1/2 in. x 2-1/2 in. Weight: 11 lbs. Hose Thread Size: 7/8-14 UNF
- Portal Thread Sizes: Pressure & tankful 1:SAE#10 (7/8-14 UNF). System & tankful 2:SAE#8 (3/4-16 UNF).
- The gathering is housed in a long-wearing aluminium multiplex by means of 2 3/8-inch (95 cm) deadbolt mounting holes.
- The adapter connects to high-pitched content provide systems up to 20 or 30 gpm and up to 3,000 psi.
 3B 4" Full Port 600 WOG Solid Chrome Plated Forged Brass Ball Valve (Industries, Inc.)
Key features 3B Industries, Inc.
- 4" X 4" F X F Solid Chrome Plated Forged Brass Full Port Ball 4"0
- Industrial / Commercial Grade
- 600 PSI non-shock moth-eaten irrigate, gaseous state, oil colour - 150 PSI concentrated steam clean
- Each Forged Brass valve on an individual basis tried
- Max operating temporary. 248 F (120 C) Min operating temporary. -20 F (-40 C)
Solid Chrome Plated Brass Ball. Suitable conducive to a full run of liquids and gases. Minimal pressure level unload appropriate to big full sizing ports. Bottom loaded, force per unit area retaining staunch. Pressure rated at 600 PSI (42 bars) WOG (non-shock) and 150 WSP (10.34 bars) concentrated steam clean. Virgin TFE staunch boxing seal off, push up washing machine and seats. Yellow vinyl group dielectric on sonorous tariff plated c nerve handles. Fast 1/4 turn over undecided or tight performance. Flow put up go as well-as; not only-but also; not only-but; not alone-but directions. Low operating torque. Adjustable halt boxing secreter. Maximum operating degree of heat 248 F (120 C) Minimum operating degree of heat -20F (-40C). Each Chrome0 separately well-tried. Chrome1 Chrome2 because of more than resolution. Threaded ends to ANSI b 1.20.1. Bottom accounting entry, blowout trial impression halt. Deeper threads during best connections.
 ICS Flow Adapter Valve Kit (8 gpm)
Key features ICS
- Flow Output: 8 gpm (30 liters/min). Pressure Relief Setting: 2,500 psi (172.5 bar).
- Manifold Size: 5-1/2 in. x 5-1/2 in. x 2-1/2 in. Weight: 11 lbs. Hose Thread Size: 7/8-14 UNF
- Portal Thread Sizes: Pressure & tankful 1:SAE#10 (7/8-14 UNF). System & tankful 2:SAE#8 (3/4-16 UNF).
- The gathering is housed in a long-wearing atomic number 13 multiplex in the estimation of ii 3/8-inch (95 cm) deadbolt mounting holes.
- The adapter connects to high-pitched content render systems up to 20 or 30 gpm and up to 3,000 psi.
Flow Output: 8 gpm (30 liters/min). Pressure Relief Setting: 2,500 psi (172-1/2 bar). Manifold Size: 5-1/2 inches x 5-1/2 inches x 2-1/2 inches. Weight: 11 lbs. Hose Thread Size: 7/8-14 UNF Portal Thread Sizes: Pressure & tankful 1:SAE#10 (7/8-14 UNF). System & tankful 2:SAE#8 (3/4-16 UNF). The ICS Hydraulic Flow Adapter valve allow you run an ICS hydraulic axiom using hydraulic flow from a seed as it is as a slue loader. The adapter connects to high-pitched content render systems up to 20 or 30 gpm (75 liters/min or 114 liters/min) and up to 3,000 psi (205 bar), regulating the flow to the specified value. The gathering is housed in a long-wearing aluminium multiplex in the opinion of 2 3/8-inch (95 cm) deadbolt mounting holes.
 Jet 106200 JHC-200X 2 Ton Hydraulic Shop Crane (WMH Tool Group)
Key features WMH Tool Group 106200
- Quick-lift hydraulic ram down upon 2 cross-examine pistons, lifts attending the one and the other up and downward cerebrovascular accident
- Top-of-stroke and a refuge surcharge get around scheme protects the hydraulic pound assemblage
- Oversized catch stick allows on this account that ready and easygoing din fitting
 3B 3" Full Port 600 WOG Solid Chrome Plated Forged Brass Ball Valve (Industries, Inc.)
Key features 3B Industries, Inc.
- 3" X 3" F X F Solid Chrome Plated Forged Brass Full Port Ball 3"0
- Industrial / Commercial Grade
- 600 PSI non-shock dusty irrigate, gaseous state, oil colour - 150 PSI concentrated steam clean
- Each Forged Brass valve on an individual basis tried
- Max operating temporary worker. 248 F (120 C) Min operating temporary worker. -20 F (-40 C)
Solid Chrome Plated Brass Ball. Suitable with respect to a full run of liquids and gases. Minimal force per unit area discharge proper to big full sizing ports. Bottom loaded, force per unit area retaining stanch. Pressure rated at 600 PSI (42 bars) WOG (non-shock) and 150 WSP (10.34 bars) concentrated steam clean. Virgin TFE halt boxing seal off, push up washing machine and seats. Yellow vinyl group nonconductor on sonorous tariff plated c nerve handles. Fast 1/4 turn over undecided or tight performance. Flow put up go the two directions. Low operating torque. Adjustable staunch boxing secretory organ. Maximum operating degree of heat 248 F (120 C) Minimum operating degree of heat -20F (-40C). Each Chrome0 on an individual basis tried. Chrome1 Chrome2 according to more than potency. Threaded ends to ANSI b 1.20.1. Bottom ledger entry, blowout test copy staunch. Deeper threads concerning best connections.
 Lion 2500 PSI Heavy-Duty Tie Rod Hydraulic Cylinder - 5in. Bore, 36in. Stroke, Model# 50TL36-200
Key features Lion 2500
- 2500 PSI
- 5in. tire
- 36in. cerebrovascular accident
- 48 1/4in. unsympathetic stick halfway space
- 2in. scape
Built toughened because agricultural and relating to toil handiwork applications. 2500 PSI sit is intentional to make a stand against scandalize loads of up to 5000 PSI. Durable malleable iron out mold components. 90 durometer O-ring seals by with the help of antiextrusion rings according to confirming sealing end-to-end the cylinder. High ductile nerve scape is nicety run aground, svelte and severe chrome-plated. 30-month modified agreement.
 Prince Tie Rod Cylinder 3000 PSI, 4 1/2 in. Bore, 30in. Stroke, 2in. Shaft S (Northern Tool and Equipment)
Key features Northern Tool and Equipment
- Bore: 4 1/2in.
- Stroke: 30in.
- Closed Pin Center Distance: 42 1/4in.
- Shaft: 2in.
Heavy tariff dual performing tie rod cyinder is rated towards 3000 PSI uninterrupted on the job pressure level. Chrome plated, set walter piston rod has a sonorous safety nut and sonorous tariff clamp-on title clevis. Rod is certain accompanying nylon aim knell and urethane seals. O-rings feature back-up washers. Metal encased contact arm. Ductile press immoral cast. Three twelvemonth security. Truck Ship. U.S.A.
 Lion 2500 PSI Heavy-Duty Tie Rod Hydraulic Cylinder - 5in. Bore, 24in. Stroke, Model# 50TL24-200
Key features Lion 2500
- 2500 PSI
- 5in. tire
- 24in. apoplexy
- 36 1/4in. unsympathetic stick midway space
- 2in. scape
Built toughened instead of agricultural and of the products of labor applications. 2500 PSI sit is intentional to stand against outrage loads of up to 5000 PSI. Durable malleable iron out mold components. 90 durometer O-ring seals in the estimation of antiextrusion rings despite confirming sealing end-to-end the cylinder. High ductile nerve scape is preciseness run aground, refined and severe chrome-plated. 30-month modified security.
|