* Tools & Hardware
Home › Hydraulics
Northern Tool and Equipment Bore: 4 1/2in.
Prince Tie Rod Cylinder 3000 PSI, 4 1/2 in. Bore, 24in. Stroke, 2in. Shaft S (Northern Tool and Equipment)
Key features Northern Tool and Equipment
  • Bore: 4 1/2in.
  • Stroke: 24in.
  • Closed Pin Center Distance: 36 1/4in.
  • Shaft: 2in.
Heavy tariff two-fold performing tie rod cyinder is rated as antidote to 3000 PSI uninterrupted on the job pressure level. Chrome plated, set walter piston rod has a sonorous safety nut and sonorous tariff clamp-on title clevis. Rod is certain in company with nylon aim knell and urethane seals. O-rings feature back-up washers. Metal encased wiper arm. Ductile iron out immoral cast. Three yr warrant. U.S.A.

Prince Open halfway, force on the farther side of, or unsympathetic midway
Prince 3 Spool Control Valve, Model# HC-V-R21
Key features Prince
  • Ideal as being loader applications
  • Open halfway, force on the farther side of, or unsympathetic midway
Three spool control valve by the agency of swim on unitary spool. Load checks from each one spool, to 25 GPM. Relief valve predetermined at 2000 PSI; adjusts from 1500-3000 PSI. Power over content. 3/4in. inlet/outlet ports, 1/2in. act ports. USA

10 Ton Hydraulic Porta Power (Pit Bull)
Features: - Flat Base - Jack Hose - 10 Ton Ram - Wedge Head - Male Connector - Spreader Ram - Hydraulic Pump - Serrated Saddle - Extension Bars (4ft number in lenght) - Flex Rubber Head - Blow-Molded Case - Spreader Ram Toe - Spreader Plunger Toe MSRP: $249.99

Prince Maximum PSI: 1600
Prince Heavy Duty Hydraulic Motor - 14 GPM, 1600 PSI, Model# ADM300-4RP
Key features Prince
  • Maximum Displacement (cu.in.): 17.9
  • Maximum GPM: 14
  • Maximum RPM: 250
  • Maximum PSI: 1600
  • Maximum Torque (in.lbs.): 2890
For short and spiritualist duty applications. Replacement on this account that Charlynn H, White HS, and Ross TRW MG serial. Maximum recess force per unit area is 2500 PSI and upper limit hinder pressure level is 1000 PSI. Fully two-sided, 4-bolt put on immediately after 1in. x 1 3/4in. scape in company with 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle.

Prince Maximum Torque (in.lbs.): 3392
Prince Heavy Duty Hydraulic Motor - 14 GPM, 1300 PSI
Key features Prince
  • Maximum Displacement (cu.in.): 24.4
  • Maximum GPM: 14
  • Maximum RPM: 160
  • Maximum PSI: 1300
  • Maximum Torque (in.lbs.): 3392
For scant and spiritualist duty applications. Replacement by reason of Charlynn H, White HS, and Ross TRW MG serial publication. Maximum recess pressure level is 2500 PSI and upper limit hind pressure level is 1000 PSI. Fully two-sided, 4-bolt put on in the estimation of 1in. x 1 3/4in. scape through 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle.

3B Industries, Inc. 2 1/2' X 2 1/2' F X F Solid Chrome Plated Forged Brass Full 1/2'0 1/2'1 1/2'2
3B 2 1/2" Full Port 600 WOG Solid Chrome Plated Forged Brass Ball Valve (Industries, Inc.)
Key features 3B Industries, Inc.
  • 2 1/2" X 2 1/2" F X F Solid Chrome Plated Forged Brass Full 1/2"0 1/2"1 1/2"2
  • Industrial / Commercial Grade
  • 600 PSI non-shock dusty irrigate, gaseous state, oil colour - 150 PSI concentrated steam clean
  • Each Forged Brass valve separately tried
  • Max operating temporary. 248 F (120 C) Min operating temporary worker. -20 F (-40 C)
Solid Chrome Plated Brass Ball. Suitable in opposition to a full run of liquids and gases. Minimal pressure level set down exactly to big full sizing ports. Bottom loaded, force per unit area retaining stanch. Pressure rated at 600 PSI (42 bars) WOG (non-shock) and 150 WSP (10.34 bars) concentrated steam clean. Virgin TFE staunch boxing seal off, push up washing machine and seats. Yellow vinyl group nonconductor on sonorous tariff plated c nerve handles. Fast 1/4 turn over undecided or tight functioning. Flow tin go the pair directions. Low operating torque. Adjustable staunch boxing secreter. Maximum operating degree of heat 248 F (120 C) Minimum operating degree of heat -20F (-40C). Each Chrome0 severally tried. Chrome1 Chrome2 towards more than lustiness. Threaded ends to ANSI b 1.20.1. Bottom ledger entry, blowout test copy staunch. Deeper threads in favor of best connections.

Dynamic Maximum GPM: 15.8
Dynamic Low Speed, High Torque Hydraulic Motor - 15.8 GPM, 1250 PSI
Key features Dynamic
  • Maximum Displacement (cu. in.): 23.6
  • Maximum GPM: 15.8
  • Maximum RPM: 150
  • Maximum PSI: 1250
  • Maximum Torque (in. lbs.): 3720
For light- and medium-duty applications. Replacement as being Charlynn H, White HS and Ross TRW MG serial publication. Maximum recess force per unit area is 2500 PSI and upper limit hind pressure level is 1000 PSI. Fully two-sided. 4-bolt put on. 1in. x 1 3/4in. scape has 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle. 1-year modified warrant.

Dynamic Maximum RPM: 190
Dynamic Low Speed, High Torque Hydraulic Motor - 15.8 GPM, 1250 PSI
Key features Dynamic
  • Maximum Displacement (cu. in.): 19
  • Maximum GPM: 15.8
  • Maximum RPM: 190
  • Maximum PSI: 1250
  • Maximum Torque (in. lbs.): 3190
For light- and medium-duty applications. Replacement in favor of Charlynn H, White HS and Ross TRW MG serial. Maximum recess force per unit area is 2500 PSI and upper limit hinder pressure level is 1000 PSI. Fully two-sided. 4-bolt put on. 1in. x 1 3/4in. scape has 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle. 1-year modified

Hydraulic Pipe Bender 16Ton Ljy16/2 Package (ToolShopUSA)

Prince Maximum Torque (in.lbs.): 2305
Prince Heavy Duty Hydraulic Motor - 14 GPM, 1800 PSI, Model# ADM200-4RP
Key features Prince
  • Maximum Displacement (cu.in): 12.15
  • Maximum GPM: 14
  • Maximum RPM: 400
  • Maximum PSI: 1800
  • Maximum Torque (in.lbs.): 2305
For scant and spiritualist duty applications. Replacement with a view to Charlynn H, White HS, and Ross TRW MG serial. Maximum recess force per unit area is 2500 PSI and upper limit hinder force per unit area is 1000 PSI. Fully two-sided, 4-bolt put on along with 1in. x 1 3/4in. scape in the estimation of 1/4in. keyway. 1/2in. NPTF ports. Orbiting Gerotor Principle.