 Chicago Pneumatic 1/2" Impact Wrench with 2" Extended Anvil / CPT-749-2
Key features Chicago Pneumatic CPT-749-2
- Oil bath "Spring Hammer" clutch pedal chemical mechanism with a view to incapable of further analysis force, high-pitched lasting quality and rock-bottom vibe
- Differential regulator with iv confirming force settings in forwards and constituent force in contrary
- 2" extended anvil as antidote to pall act
- Applications: high-pitched loudness jade shops
Specifications: Square Drive: 1/2" Weight: 5-1/2 lbs. Length: 9" Avg. Air Consumption: 5 CFM Air Inlet NPTF: 1/4" Working Torque Range: 50-450 ft/lbs. Ultimate Torque @ 90 PSI Forward: 500 ft/lbs. Ultimate Torque @ 90 PSI Reverse: 625 ft/lbs.
 3/8" Drive Heavy Duty Impact Wrench (Sunex Tools)
Key features Sunex Tools
- 3/8" Drive Heavy Duty Impact Wrench is the to the highest degree puissant and stocky sizing to force fixed relation in its division
- Bias motor instead of upper limit occupy turned force
- Twin cock impact chemical mechanism
- Variable velocity induction
- 6-position velocity regulator
Sunex Tools 3/8" Drive Heavy Duty Impact Wrench is the to the highest degree potent and thick sizing to force rate in its division - Bias motor on the side of upper limit occupy turned force - Twin cock impact chemical mechanism - Forged nerve cock lodging - Variable velocity induction - 6-position velocity regulator Specifications: - Square Drive (In.) 3/8 - Max. Torque (ft.lbs. @90PSI) 300 - Working Torque (ft.lbs.) 90-260 - Free Speed (RPM@90PSI) 12,500 - Blows Per Minute: 1,400 - Air Inlet (NPT) 1/4 - Recommended Air Pressure (PSI) 90 - Average Air Consumption (CFM) 4 - Sound Level (dBA) 97 - Length (In.) 5.7
Ingersoll Rand Air Impact Wrench 1/2" Ultra Duty
Key features Ingersoll Rand
- Air Impact Wrench 1/2" Ultra Duty
- 245 ft-lbs of upper limit torque.
- 2 in anvil
245 ft-lbs of upper limit torque. 2 in anvil
 AirCat (ACA1300TH) 3/8" Impact, Black Composite Body Impact Wrench
 3/8" Impact, Black Composite Body Impact Wrench (AirCat)
Features and Benefits: Twin Hammer Mechanism Tuned release Maximum laxation torque: 400 ft./lbs. Working torque: 50-350 ft./lbs. DBA: 85 - soundless force!
 3/8" Drive Titanium Impact Wrench (Ingersoll Rand)
Features and Benefits: Titanium substance this cat's-paw testament remain firm up below the toughest environments TNT torque: 280 ft/lbs. Working torque: 25-230 ft./lbs. Free velocity: 15,000 rpm Average beam cons.: 4 cfm 1.97 in. broad at cock caseful - littler than other tools in the replete sizing 3/8 in. rank, allows users to acquire in and come out of mellow spots Lightweight at only when 2.4 lbs.
 V-8 Tools (V8T9810) 10 Piece Jumbo Angled Wrench Set
Features and Benefits: Jumbo bob wrenches ar indispensable to the sonorous tariff hand on the job on the trucks, tractors and sonorous rigging. A for a long time sonorous wrench to break away slack a big fixing and a little knee wrench to goal the book of job faster and easier. The scant and little fish-hook wrenches trim back manipulator tiredness in the rear of a protracted daytime of repeated habituate. Many mechanics habituate the little cusp wrenches exclusively at the time on the job on hydraulic lines that don't need high-pitched torque. V-8 Jumbo hook wrench WE CANNOT SHIP THIS ITEM TO APO ADDRESSES.
 Milwaukee 3/4" Impact Wrench
Key features Milwaukee
- HEAVY DUTY IMPACT WRECH
- FORWARD/REVERSE AC/DC ROCKER SWITCH
- POWERFUL 7.0 AMP MOTOR
- DETENT RETAINER
Delivering a whopping 380 ft. lbs. of torque and weighing only if 6.2 pounds, this cat's-paw has a wild force to weighting rate. The 3/4 in. straight anvil is more than resistant to longing full term weariness than a 1/2 in. anvil. The sinewy 7.0 amp motor drives a uncommon i
 1/2" Composite Ultra Duty Air Ratchet (Ingersoll Rand)
Features and Benefits: New head up plan features I-R sole disc jungle conducive to thirster utensil lifetime and lasting quality Lightweight composite palm against higher-up soothe New productive plan
 Makita 6936FD 18-Volt NiMH Cordless Impact Driver
Key features Makita 6936FD
- Powerful effectual impacting @ 105 Ft.Lbs. (1260 in. lbs.)
- True Variable Speed (0-2600) RPM since controlled Fastening.
- Efficient Impacts by narrow (0-3200) BPM
- Impact Resistant Magnesium Alloy Hammer Case Provides Increased Durability
- Most Compact Design in Its Class at a amplification of only if 6-3/8".
Includes 18V Cordless 1/4" Impact Driver, (2) 18 Volt 2.6 Ah Ni-MH Batteries 1834 (193159-1), Universal Charger (DC1804), (2) Battery Covers (414938-7), Tool Case (824763-2), Operating hand-book.
|