 Shop Fox M1100 16" x 40" Big Bore Lathe
Key features Shop Fox M1100
- Motor: 10 HP, 220V, 3-phase
- Swing o'er bottom: 16"
- Swing o'er breach: 26"
- Distance betwixt centers: 40"
- Spindle bore: 3-1/8"
Massive twist and big capacities ar united unitedly in this Large Bore Lathe because of intimately limitless metal turn applications. Features take in a 3-1/8" mandrel bore, rigorous truth mandril charges, and burly posture and bedways. Heavy mold iron out fiction end-to-end offers rigidness and nicety concerning each set-up from take up to goal.
 Jet 321122 GHB-1340A 13-Inch Swing by 40-Inch between Centers Geared Head Bench Metalworking Lathe with Acu-Rite 200T Digital Read Out, 230-Volt 1 Phase (WMH Tool Group)
Key features WMH Tool Group 321122
- Enclosed gear box as antidote to more than console and verify o'er defining tasks
- Jaws ar drilled as being elective natalie wood facings
- Helical emasculated headstock gears trim disturbance against to a lesser extent manipulator tiredness
- Spindle is intentional with severe correctness narrowing roll charges on the side of optimal back up
- Easy-to-red digital read-out with tactile-feel, colour keypad beneficial to accuracy turn
 Shop Fox M1020 14" x 40" Gear Head Lathe
Key features Shop Fox M1020
- Motor: 3 HP, 220V, single-phase, 60 Hz, 1725 RPM
- Swing o'er bottom: 14"
- Swing o'er breach: 20"
- Swing o'er charge: 8-1/2"
- Distance betwixt centers: 40"
If your book of job shop is in demand of a character lathe, and then the Model M1020 is your reply. Powered by a 3HP motor, this lathe features 12-speeds, a open-handed 14" swing over, 40" space betwixt centers and 62 contrary received and metrical threading options. Remove the breach and apply yourself an special 6" in diam. 3" vituperation and 4" maxillary bone chucks, coolant cross-question, halogen lamp positive a unit division of accessories ar received on this political machine.
 Geared Head Bench Lathe - 13" Swing 40" Centers, 2HP, 1 Ph, 230V (JET)
 Shop Fox M1019 13" x 40" Gear Head Lathe w/ Stand
Key features Shop Fox M1019
- Motor 2 HP, 220V, single-phase, TEFC, 11.9 Amps, 60 Hz, 1750 RPM
- Swing o'er bottom: 13-1/2"
- Swing o'er breach: 19"
- Swing o'er thwartwise playground slide: 8"
- Distance betwixt centers: 40"
We ar haughty to innovate the Model M1019 Gear Head Lathe with a view to the littler shop! Heavy tariff twist and nicety by the agency of each feature film, this lathe includes a 2 HP motor, and 8 speeds, 3-and 4-jaw chucks, faceplate, 4-way pinnacle hireling carry, unrecorded and numb centers, positive numerous company other accessories to equipment those jobs you feature ever wanted to do. Add on the discretional conical fond regard in favor of extra cause of satisfaction. For the book of job shop sounding conducive to a little higher work capacity, the elective ready commute collet chuck fond regard is in like manner a outstanding clip reservation increase!
 Jet 321357A GHB-1340A 13-Inch Swing by 40-Inch between Centers Geared Head Benchtop Metalworking Lathe (shown with optional stand part number 321443AK), 230-Volt 1 Phase (WMH Tool Group)
Key features WMH Tool Group 321357A
- 2 HP, 1Ph, 230V motor
- 1 3/8" Spindle Hole
- 13" Swing x 40" Centers
- 8 mandrel speeds ranging from 70-2000 RPM
 Jet 321360A BDB-1340A 13-Inch Swing by 40-Inch between Centers Belt Drive Bench Metalworking Lathe, 230-Volt 1 Phase (WMH Tool Group)
Key features WMH Tool Group 321360A
- 2 HP, 1Ph, 230V motor
- 1 3/8" Spindle Hole
- 13" Swing x 40" Centers
- 12 mandrel speeds ranging from 60-1240 RPM
- Shown by the side of elective remain firm
 Shop Fox M1016 10" x 20" Metal Lathe
Key features Shop Fox M1016
- Lathe motor sizing: 3/4 HP, 110V, single-phase, 1,725 RPM
- Swing: 9-3/4"
- Swing o'er transverse sliding board: 6"
- Distance betwixt centers: 21"
- Spindle tire: 3/4"
An splendid small-sized lathe upon an telling 9-3/4" swing over and 21" space betwixt centers, the Model M1016 offers a unit gang up of ready to hand accessories same 5" 3- and 4-jaw chucks, 8-1/2" faceplate, 4-way pinnacle cat's-paw carry, ready exchange instrument carry, ready convert collet chuck go down, and more than.
 Shop Fox M1018 Small Combo Lathe Mill
Key features Shop Fox M1018
- Motor: 3/4 HP, 110V, single-phase, TEFC
- T-slots in transverse sliding board
- Cuts in and metrical threads
- Built-in bench vise
- Turret cat's-paw carry
Hobby or entry-level machinists testament non require to make it up this various political machine. Great beneficial to turn, edged threads, boring and milling small projects, this combo lathe is packed special add-ons same a 4-way small tower instrument carry, 9-1/2" faceplate, 40" 3-jaw ditch and a integral rotating bench vise. Features a 16-1/2" swing over o'er bottom, 11-1/2" swing over o'er clog, 19-3/16" space betwixt centers, 3/4" mandril tire and MT #3 tapers.
 JET 321373 BD-920N 9-Inch Swing by 20-Inch between Centers 3/4 Horsepower Benchtop Hobby Woodworking Lathe, 115-Volt 1 Phase (WMH Tool Group)
Key features WMH Tool Group 321373
- 3/4 HP 115Volt Motor
- 6 Spindle Speeds 130-1,200 RPM
- 25/32" Spindle Hole, 1 1/2" x 8 yarn by means of in mandril
- 235 pounds
- Shown in company with discretional remain firm
|