 Jet 690019 JTM-1 Vertical Milling Machine with X-Axis Powerfeed, 230/460-Volt 3 Phase (WMH Tool Group)
Key features WMH Tool Group 690019
- X-axis powerfeed installed
- 2HP, 3Ph, 2-speed, 230V motor
- 12.25" of ram down move around
- Collet content is 1/8-7/8 inches
- 16 mandrel speeds ranging from 80-5440 RPM
 Jet 690082 JTM-1 Vertical Milling Machine, 230/460-Volt 3 Phase (WMH Tool Group)
Key features WMH Tool Group 690082
- 2HP, 3Ph, 2-speed, 230V motor
- 12.25" of pound move around
- Collet content is 1/8-7/8 inches
- 16 mandril speeds ranging from 80-5440 RPM
- Built by the agency of coolant system(coolant cross-examine non included)
 Jet 690089 JTM-2 Vertical Milling Machine, 115/230-Volt 1 Phase (WMH Tool Group)
Key features WMH Tool Group 690089
- 2HP, 1Ph, 115/230V motor (Prewired 230V)
- 12.25" of ram down move around
- Collet content is 1/8-7/8 inches
- 8 arbor speeds ranging from 80-2720 RPM
- Built in company with coolant system(coolant cross-question non included)
 Shop Fox M1003 9" x 49" Vertical Mill
Key features Shop Fox M1003
- Motor: 2 HP, 110V/220V, single-phase, TEFC, prewired to 220V
- Spindle move around: 5"
- Table sizing: 9" x 49"
- Table move around (longitudinal): 27"
- Quill feeds/spindle rev.: .0019", .0035", .0058"
Weighing in at o'er 2,400 lbs of mold iron out and set accuracy run aground nerve, Model M1003 has the sizing and stableness to palm the toughest jobs. With a 2 HP motor impulsive 8 speeds from 78 to 2,400 RPM, 3 velocity quill pen feast by the agency of a micrometer gauge deepness block, auto contrary and a variable quantity velocity longitudinal force feast, this political machine has the power to do the to the highest degree coordination compound and exact jobs. This barbarous has as well-as; not only-but also; not only-but; not alone-but force and artifice!
 Jet 690038 JVM-836-3 Vertical Milling Machine, 230-Volt 3 Phase (WMH Tool Group)
Key features WMH Tool Group 690038
- Work patch put up be up to 500 pounds towards a broad change of milling applications
- 1.5HP, 3Ph, 230V motor conducive to optimal milling force
- 10-1/2 inches of pound move around concerning upper limit versatility
- Collet content is 1/8-7/8 inches
- 10 arbor speeds ranging from 120-1550 RPM
 Jet 690036 JVM-836-1 Vertical Milling Machine, 115/230-Volt 1 Phase (WMH Tool Group)
Key features WMH Tool Group 690036
- 1.5HP, 1Ph, 115/230V motor(Prewired 115)
- 10.5" of pound move around
- Collet content is 1/8-7/8 inches
- 5 arbor speeds ranging from 240-1550 RPM
- Work patch tin be up to 500 pounds
 Airtec RT-2500 Scarifier
Key features Airtec
- Honda 8HP Engine w/ Gear reducing conducive to yearner life-time
- 10" Drum w/ 8pt. atomic number 6 w tipped cutters
10" sonorous tariff scarifier, micro deepness verify, certain charges, vacuum-clean larboard during dust liberal trading operations, braking scheme, adjustable palm
 Shop Fox M1002 8" x 36" Vertical Mill
Key features Shop Fox M1002
- Motor: 1-1/2 HP, 110V/220V, single-phase, two-sided TEFC, 1,725 RPM
- Spindle make conical: R-8
- Spindle move around: 5-1/4"
- Table move around (cross): 9-1/2"
- Max. dist. mandril to tower: 15-1/2"
The Model M1002 is priced and sized concerning the staid little shop. This mill features a 1-1/2 HP motor, 5 velocity head up, R-8 mandril and criminal maintenance well-disposed single-shot lubrication. Precision run aground and set shipway back up a large 7-7/8" x 35-3/4" tabularize. The 20" tabularise move around put up be stirred by the longitudinal force feast positive a speedy feast change.
 Shop Fox M1008 Vertical Mill
Key features Shop Fox M1008
- Motor: 2 HP, 220V, Single-phase, TEFC electrical condenser take up inductance
- RPM: 1,725
- Power Transfer: V-Belt ride
- Spindle light: R-8
- Spindle move around: 5"
This 2 HP vertical mill is reinforced strict and sonorous in the place of tight endurance machining in the little shop or short relating to toil handiwork scope. The 3 axis vertebra arbor head up and 3 axis vertebra rotating tabularize allows potentially each typewrite of gelded feasible attending a vertical mill. Other features embody 22" upper limit spindle/column space, R-8 mandril pyramidal, 9 mandril speeds, coolant pump/nozzle, act scant, and longitudinal force feast. Constructed by means of extra-thick castings, powder-coated pigment and distinctness run aground tabularise and shipway.
 Shop Fox M1005 10" x 34" Vertical Wood Mill
Key features Shop Fox M1005
- Motor: 1-1/2 HP, 110/220V, single-phase, 3,450 RPM, 16.4/8.2 amps, TEFC
- Amps: 16.4 @ 110V / 8.2 @ 220V
- Spindle pyramidal: R-8
- Spindle move around: 3-1/2"
- Table sizing: 10" x 33-3/4"
Rely on exact workpiece verify and increased refuge along with the various mould press Model M1005 Wood Mill. This wood mill has a big 10" x 33-3/4" set tabularize upon a 2-1/2" hole out according to boring trading operations, iii T-slots on 2-1/2" centers, and adjustable tabularize stops. The tabulate moves 17-3/4" in the X axis vertebra and 12" in the Y axis vertebra. For the Z axis vertebra, the knee joint upon set and run aground pillar and human knee slideways has 18" of move around. Combined in company with this splendid run of move around, a choice of arbor speeds betwixt 400-5,000 RPM, and a headstock that as well-as; not only-but also; not only-but; not alone-but tilts and swivels left-hand and right-hand 90°, this political machine testament accurately mill, practice, tire, or emasculated dovetails and slots into wood, metal, or pliant.
|