 Airtec RT-2000 8" Scarifier
Key features Airtec
- Honda 5.5 HP Engine
- 6 repoint c wolfram tipped cutters
8" congeal double tooth, Heavy tariff twist, micro deepness verify certain charges, hoover larboard notwithstanding dust verify, Braking scheme, adjustable palm.
 Jet Mill/Drill Built-in Power Downfeed, 2 HP, 1 Ph, 230V Only (WMH Tool Group JMD-18PFN)
Key features WMH Tool Group JMD-18PFN
- UL Listed Motor
- Extra Large Worktable
- Heavy-Duty tapering rolling wave charges back up the mandrel resulting in greater endurance and more than precise boring deepness.
- Heavy tariff power downward feast by the side of of the hand amercement feast.
- Base-taper allows with a view to easier clean-up
 Jet 350017/JMD-15 Milling/Drilling Machine (WMH Tool Group)
Key features WMH Tool Group 350017
- One-piece mold press tower instead of added back up
- Quick sliding board door latch allows faster belted ammunition accommodation to commute mandril speeds
- Tapered immoral allows as being easier clean-up
- Heavy-duty force downfeed in company with hand-book mulct feast
- 360° head up caster and special big act tabulate
 Shop Fox M1007 Mill Drill
Key features Shop Fox M1007
- Motor sizing: 2 HP, 110V/220V, single-phase
- Spindle make conical: R-8
- Spindle move around: 5"
- Swing: 15-7/8"
- Max. space mandril olfactory organ to tabularise: 17-3/4"
This benchtop mill/drill is a existent act gymnastic horse. Install the 3" human face mill (included!), discharge up the 2 HP 12-speed motor, and you testament feature chips quick in no clip! Raise the head up a proud 18" o'er the big 8" x 28" tabularize, and append the 1/2" drill ditch or R-8 collets according to holding a broad regalia of endmills. Use the clutch-type downfeed chemical mechanism in contrast with as well-as; not only-but also; not only-but; not alone-but speedy and micro-feed quill pen adjustments and the M1007 is short in the place of those amercement milling and boring trading operations.
 Cummins Industrial Tools Small Mill
Key features Cummins Industrial Tools
- Need a political machine larger than our Mini Mill?
- Then this is the metalwork political machine concerning you!
- You won't trust the damage on this patch of browse gear.
Specifications: Drilling Capacity: 1", End Mill Capacity: 1", Face Mill Capacity: 2", Maximum Spindle Stroke: 3 3/16", Throat: 9", Maximum Distance Spindle to Table: 10,Spindle Taper: MT3 or R8, Spindle Speed:, High Range: 100 - 2000 RPM, Low Range: 100 - 1000 RPM, T-Slot Size: 1/2", Table Effective Size: 17 3/4" x 6 1/4", Table Longitudinal Travel: 12", Table Cross Travel: 6", Motor Output Power: 600 W (Approx. 0.80 HP), Overall Dimensions (L x W x H): 760 mm x 720 mm x 930 mm (Approx. 29.92" x 28.34" x 36.61"
 PROXXON Micro milling machine FF230 (34108)
Key features PROXXON 34108
- PROXXON Micro milling machine FF 230
- The micro milling machine FF 230 is a little, exact milling scheme.
- The FF 230 is used to mill about, practise and countersink nerve, mould iron out, al, plaque and pliant.
The headstock swivels through and through 360°, indicated on a surmount. Height is familiarised by way of a 0 adjustable deal wheel around, furthermore used as mulct feast at what time milling. One rotation equals 1/32" (1 mm) move around, 1 air division equals .002" (0,05 mm). The quill pen and headstock may be locked in place, what one is indispensable at the time milling. The over-powering lasting artificial magnet motor drives by way of a poly-v-belt, complaisant high-pitched torques, especially at bring down speeds. The machine comes attending iii collets of 15/64" - 5/16" and 25/64" (6, 8 and 10 mm). The substantial tabularize has a sizing of 10 5/8" x 3 5/32" (270 x 80 mm) and is T-slotted to 15/32" x 15/64" x 13/64" (the MICROMOT rule of 12 x 6 x 5 mm). Technical information: Speeds 280, 550, 870, 1,250, 1,700, 2,500 rpm Table Size 10 5/8" x 3 5/32" Column Size Ø 1 3/8" x 15 3/4" a long time X-Y Travel 6 11/16" x 2 9/16" (170 mm x 65 mm) Overall Height 20" Volts 110-120V AC, 60 Hz Weight 41 lb.
 MK Diamond MK-1506 VR Profile/Edge Miller 1200 Watts 120 Volts
Key features MK Diamond
- Powerful linguistic universal variable quantity velocity motor
- Quick free memorial tablet water-feed coupler
- Die-cast atomic number 13 steer bearing according to composite plant roll gathering
- Ground Fault Circuit Interrupter included
- Ergonomically intentional in quest of user solace
The MK-1506 VR is a distinctness political machine intentional to bring out clear profiles and contours on the edges of instinctive lapidate slabs. When fitted accompanying a MK Diamond outline miller, this implement creates pro contour line and side view borders.
 Heavy Duty Drilling and Milling Machine (Speedway Series)
Key features Speedway Series
- Motor: 1.5 HP, 110 Volt, Single Phase/60Hz, 1720RPM, Capicitor Start Induction
- Dimension of work table rise up: 29" x 8.250"
- Max. Distance Spindle to Table: 17.75", Column to Chuck Center: 8"
- Ground Cast Iron Construction
- Max. Spindle Travel: 5", Spindle have a conical shape MT3, Chuck Cap. .625"
- - Range of speeds: 120 - 2580RPM attending 14 Speeds - Table move around (X Axis): 19.750, (YAxis): 7" - Height: 42.5", Width(with deal wheels on): 46", Overall Depth: 36", Base sizing: 16" x 24", Quill Dia. 2.950'
 Cummins Industrial Tools Mini Milling Machine
Key features Cummins Industrial Tools
- 3/4 HP
- Drilling Capacity: 1/2" (13mm)
- End Milling Capacity: 1/2" (13mm)
- Face Milling Capacity: 1" (25mm)
- Spindle velocity: Low: 0 - 1100 RPM, High: 0 - 2500 RPM
This mini mill around is a outstanding increase to you shop. The hone metal stinging implement. Use this mini mill about during surfacing, ho-hum, stinging curves and indexing. Includes:
 Palmgren 49181 MTC18 Compound Milling Table, 18.0-Inch
Key features Palmgren 49181
- Handles at to each one terminate of the 18-5/8" tabulate come up do it practicable to habituate the tabularise from one and the other face.
- Solid, mould press and nerve twist
- Slides feature adjustable gibs to defend truth
- Table top out features ii 9/16" T-slots, 2-3/8" center-to-center
- Rotary dials graduated in 0.02 mm increments: for each one replete revolution apply 2 mm (Approx. 0.0787") social movement
|