 Tolman Tool OCB2 Replacement Short Cutter Jaw
Key features Tolman Tool OCB2
- Replacement short cutter jaw
 Malco S2 3-Inch Hand Seamer (S2XXX)
Key features Malco S2XXX
- Precise vee-notched deepness graduations on mouth ar in 1/4" increments
- ar set down forged, high-pitched wallop nerve
- Hardened nerve handles refuse clapperclaw
- Rust resistant atomic number 28 metal plating
- Non-slip vinyl group grips in company with hand stops bring home the bacon added soothe and opposition to elements
3" Wide Hand Seamer, For Sheet Metal, Made In USA.
 BAC Industries JR-02 Jumbo Rod Bender 7/8" diameter max. capacity
Key features BAC Industries
- JR-02 Jumbo Rod Bender 7/8" diameter max. capacity
- Constructed of 4" x 6" al immoral 1" deep in company with a 16" palm 7/8" diameter.
- Bends metal to whatsoever mould and level of bob. Bends strong circular, straight and monotone press.
- Works on strong materials of up to 3/8" circular and straight (1/2" broad flat).
- Coils and bends conducting wire of frequent sizes. Include dies with regard to 3/8", 3/4", 2", 3" and 4" diameter bends.
JR-02 Jumbo Rod Bender 7/8" diameter max. capacity. Constructed of 4" x 6" atomic number 13 immoral 1" deep by the agency of a 16" palm 7/8" diameter. Bends metal to whatever mold and level of elbow. Bends substantial circular, straightforward and monotone press. Works on substantial materials of up to 3/8" circular and straight (1/2" broad flat). Coils and bends conducting wire of great number sizes. Include dies in spite of 3/8", 3/4", 2", 3" and 4" diameter bends.
 S9 Malco Hand Seamers Jaw Width 9"
S9 Hand Seamers Jaw Width 9". Jaw deap 2", boilersuit duration 9".
 Ridgid 36122 Instrument Benders
Key features RIDGID 36122
- COMBINE ACCURACY WITH EASY OPERATION
- OFFSET CUSHION GRIP HANDLES ELIMINATE KNUCKLE CRACKING WHEN FORMING 180 DGRS. BENDS
- TUBE SIZE: 1/4" O.D.
- BEND RADIUS: 1/4"
# Offset buffer adhesive friction handles wipe out metacarpophalangeal joint cracking whenever forming 180 stage bends. # 90 stage take up fish and unexampled oil-absorbing shoe denigrate bend sweat. TUBE SIZE: 1/4" O.D. BEND RADIUS: 1/4"
 Tolman Tool Stake-Puller with Handle #S-P
Key features Tolman Tool S-P
- Stake dragger with a detachable handle
- Pulls natalie wood or nerve stakes with comfort
- Made of malleable press
- Detachable 1-inch-by-3-foot galvanized tube handle
- Weighs 10 pounds; 56 inches extended
The Tolman Tool post dragger with a handle pulls natalie wood or nerve stakes with comfort. Don't bunk up yourself or your stakes by hammering them come out of the run aground. The unsubdivided jack-style plan is a proven take shape of purchase that has been used before this antediluvian Egyptian ages. Made of malleable iron out, this post tugger takes on stakes up to 7/8-inch circular and 1-1/2-inch monotone. It features a detachable 1-inch by 3-foot galvanized tube handle.
 Malco S9 9-Inch Aluminum Hand Seamer (S9XXX)
Key features Malco S9XXX
- 9-inch aluminum enclosing walls crags
- 2-inch bend deepness
- Ideal because of facia corners
- One-hand performance
9" Seamer, For Use In Bending & Hemming Aluminum & Lightweight Metal, For Use In Soffit & Facia & Window Trim Applications.
 DS3 MALCO Locking duct stretcher
DS3 MALCO Locking duct stretcher Locking duct stretcher pulls duct sections unitedly and holds them in localize spell freeing the pair custody to array and instal ride cleats. The DS3 locks on from one and the other face of MALCO0 connectedness. No demand to correct wheels
 BAC Industries MB-18 Mighty Mini Bender 18" width stock 18 gauge mild sheet metal, 16 gauge aluminum
Key features BAC Industries
- MB-18 Mighty Mini Bender 18" width stock 18 gauge mild Mighty0 metal, Mighty1 Mighty2 Mighty3
- Bends & forms up to 18 gauge mild sheet metal, 16 gauge aluminum; up to 18" width stock.
- Clean, smooth out bends up to 90 degrees. Ideal toward warming & temperature reduction ducts, lengthening runs
- Ideal as antidote to one-time fiction of boxes, covers, trays, etc.
- An Economical Brake in favor of Bending & Forming Sheet Metal
MB-18 Mighty Mini Bender 18" width stock 18 gauge mild Mighty0 metal, Mighty1 Mighty2 Mighty3 An Economical Brake as being Bending & Forming Mighty4 Metal. Clean, smooth out bends up to 90 degrees. Bends & forms up to Mighty5 Mighty6 Mighty7 Mighty8 metal, Mighty9 Mini0 Mini1 up to Mini2 Mini3 Mini4 Ideal despite warming & temperature reduction ducts, produce runs or one-time fable of boxes, covers, trays, etc. (To carry into effect this, you new wine gelded 1" rich slots in brushwood bar). Includes (2) 8" handles, constructed of 3/16" extruded Mini5 Includes mounting holes in immoral because of standing still or light applications. Includes thicket exclude.
 Heavy Duty Tubing Cutter 3/16 5/16 & 3/8in (K Tool International)
72340Heavy Duty Tubing Bender Bends 1/4" - 5/16" - 3/8" al, nerve or atomic number 29.
|