 MK Diamond 155961 MK-2005 H 5-1/2 HP Gas Powered Brick Saw
Key features MK
- Rips=16 in , Diagnal Cut=N/A in, Depth of Cut=5 in
- 5-1/2 hp Honda gas motor
- Open-back plan allows during larger stuff to be emasculated
- Comes by the agency of a 14 in. superior general resolve wet/dry diamond leaf blade
- One twelvemonth modified pledge
The MK-2005 H is a gas powered, lactating stinging, brick and cube saw accompanying a 5-1/2 hp Honda motor. The MK-2005 H has a 14 in. leaf blade content, 5 in. deepness of gelded and 16 in. amplification of emasculated. Manufactured immediately after cast-aluminum structural components and a jig-welded
 Pro Cut 14" Blade Capacity Concrete Saw
Key features Pro Cut
- 14" Blade Capacity Concrete Saw
- Honda 9 HP by means of cyclone broadcast filter out, 14" capacity
- Heavy tariff chassis, spindle-saver nab plan
- Water tankful in spite of juiceless edged dust curtailment, edged deepness up to 4 5/8"
- Right deal edged, weighting 195lbs. uncrated
The PC9 is a fresh intentional scotch base saw in quest of lactating and juiceless edged of mineral pitch and concrete. PC9 Concrete Saw.
 IMER MASONRY 350 14" Brick/Block Saw Short Cut 14" - 1.5hp, 110V, w/18" cut
Key features Imer
- The effective 1 1/2 hp, 15 amp, 110V motor is a dependable jobsite member of a partnership.
- Load up 4 bricks and cut them in unitary make it, or cut lapidate pavers and roofing tile to 1/24".
- Power is transmitted from the motor to the leaf blade by way of a ribbed snakelike belt ammunition.
- The legs playground slide up and outside as far as concerns easygoing shipping and storage.
- The Short Cut 14" is at present uncommitted along with a rigid stinging head up. The head up does non circumvolve to 45 degrees
Free Shipping from IMER manufacturing plant storage warehouse. Free remain firm, wheel around outfit, & 14" leaf blade. 16" x 16" Heavy Duty tabularise, cuts 4 bricks at erst. Available in 1.5hp electrical or 5.5hp gaseous state motor.
 Core Cut CC455M-E1 5-1/2 HP Honda Gas Paver Saw (Diamond Products)
Key features Diamond Products
- Easy, place of safety get at to deepness verify interlace. Stay unwavering ward. Removable head up. Open pharynx edged.
- Legs received on everything saws. Side carrying handles. Reinforced cart rails.
- Maximum Depth of Cut - 4-3/4", Blade Shaft Diameter - 7/8", Arbor Diameter - 1". Stay unwavering ward.
- Flange cube orb charges, Blade Shaft Drive - 2 belt ammunition, Blade Mounting - Left
- For totally types of paver and masonry materials. 14" leaf blade content
CC455M-E1 5-1/2 HP Honda Gas Paver Saw. Easy, strong box get at to deepness verify interlace. Stay unwavering ward. Removable head up. Open pharynx stinging. Legs received on whole saws. Side carrying handles. Reinforced cart rails. Maximum Depth of Cut - 4-3/4", Blade Shaft Diameter - 7/8", Arbor Diameter - 1". Stay unwavering ward. Flange cube globe charges, Blade Shaft Drive - 2 belt ammunition, Blade Mounting - Left For every one of types of paver and masonry materials. 14" leaf blade content.
 Best Construction Equipment Concrete and Pavement Saw - 11 HP, Model# 621100
Key features Best Construction Equipment
- Blade Size 12in. and 14in.
- Cutting Depth 4 5/8in.
- Guard Size 14in.
- Blades, non included, ar uncommitted at to the highest degree national and buliding centers
Lightweight, easy-to-use concrete/pavement saws grant the couple right-hand and left-hand deal cuts. Feaure vibration-absorbing frames to redeem correct, dependable cuts. Powered by Honda engines as being long-lasting habituate. Adjustable handles add up in the opinion of padded handgrips and an exclusively groundbreaking rose hip steer in favor of undischarged verify and to a lesser extent manipulator weariness. Wide wheelbases make secure uniform blade-to-pavement middleman with regard to thirster leaf blade lifetime and faster cuts. Blades non included. Truck ship.
 Target PS1455 14 In. Gas Porta Saw with 5.5 HP Honda GX160 Motor M50109
Key features Target
- Rips=N/A in , Diagnal Cut=N/A in, Depth of Cut=5 in
- Cutting head up pivots on charges what one ar certain and greased instead of lifespan. Only ii swivel points notwithstanding
- Bearings ar sitting in a machined load, on a heavy-duty back up, with respect to nice alignment that lasts
- Quick-mount edged head up allows easygoing remotion of the force head up since shipping
- The heading colar folds downward, so the intact edged head up gathering put up be lifted of easy. Revomabl
Engine/Motor
 Core Cut CC1309RS-XL-14 14" Blade Capacity, 9 HP Robin Engine Concrete Saw (Diamond Products)
Key features Diamond Products
- Extra tough handles adjustable to 4 positions as antidote to stiff verify - doesn't rale
- Solid, certain ego positioning blade scape orb charges. Left or right-hand face sawing.
- Maximum Depth of Cut - 4-5/8", Blade Shaft Diameter - 1-1/4", Arbor Diameter - 1" undivided ride stick
- Power transmission system to blade ride is by way of 3 molded snick 3VX insurance premium belts
- Blade coolant is delivered from an innovational dual multi-spray irrigate tube-shaped structure scheme
CC1309RS-XL-14 14" Blade Capacity, 9 HP Robin Engine Concrete Saw. Extra tough handles adjustable to 4 positions towards correct verify. Does non rale same other adjustable handles. Through rearward axle on this account that added might. 6-5/8" upper limit stinging deepness immediately after 18" blade ward 5 14"0 electrical motor alternative uncommitted. Left or right-hand deal sawing. Solid, certain ego positioning 14"1 scape globe charges. Power transmission system to 14"2 ride is by way of 3 molded snick 3VX insurance premium belts - non 2, same an of our competitors, resulting in best edged public presentation and thirster belt ammunition lifetime. 14"3 coolant is delivered from an innovational dual multi-spray irrigate tube-shaped structure scheme that gets coolant to as well-as; not only-but also; not only-but; not alone-but sides of the 14"4 from the bower to the top out of the 14"5 Flat trample no-good wheels in spite of added adhesive friction while edged on inclines and easygoing manoeuvrability.
 Target Super Tilematic Saws-Stm10100-Horsepower: 1 1/2. Blade Guard Size: 10
Key features Target
- Double Aluminum Sliding Cart System. Adjustable Cutting Head. Zinc Plated Cart Wheels .
- V-Belt Driven - Quiet. High Output Submersible Water cross-examine. Easy Alignment Rail System.
- Wet Cutting System: High denseness, epoxy resin coated irrigate interrogate, lifetime lube
- Horsepower:1 1/2 HP. Blade Guard Capacity: 10. Blade Shaft RPM: 2,760. Max. Depth of Cut: 3-3/4
- Dual Voltage: NO Stainless Steel Pan: NO Motor: Baldor
Double Aluminum Sliding Cart System. Adjustable Cutting Head. Zinc Plated Cart Wheels . V-Belt Driven - Quiet. High Output Submersible Water interrogate. Easy Alignment Rail System. Wet Cutting System: High denseness, epoxy resin coated irrigate cross-question, lifetime lubricator Horsepower:1 1/2 HP. Blade Guard Capacity: 10. Blade Shaft RPM: 2,760. Max. Depth of Cut: 3-3/4 Dual Voltage: NO Stainless Steel Pan: NO Motor: Baldor.
 Core Cut CC1055H 8" Blade Capacity, 5.5 HP Honda Engine Green Concrete Saw (Diamond Products)
Key features Diamond Products
- CC1055H 8" Blade Capacity, 5.5 HP Honda Engine Green Concrete Saw
- Center cut plan - best tracking into an existing cut and leisurely to stay fresh the cut square.
- Power transmission system to blade ride is by way of 2 molded snick 3VX insurance premium belts. Light weighting and handy
- 8 in blade content. Cutting deepness up to 2-1/4". Upcut plan with respect to a dry cleaner cut.
- Cyclone transmit dry cleaner towards increased engine length of service. Adjustable blade alignment.
CC1055H 8" Blade Capacity, 5-1/2 HP Honda Engine Green Concrete Saw. Center cut plan - best tracking into an existing 8"0 and easygoing to stay fresh the 8"1 square. Power transmission system to 8"2 ride is by way of 2 molded snick 3VX insurance premium belts. Light weighting and convenient. 8 in 8"3 content. Cutting deepness up to 2-1/4". Upcut plan toward a dry cleaner 8"4 Cyclone transmit dry cleaner in favor of increased 8"5 length of service. Adjustable 8"6 alignment.
 Partner K40 14 Inch Air Powered Cutter Saw
Key features Partner
- Engine: Air motor
- Power: 4.3 hp (3.2 kW)
- Air demand:
- Max. air pressure level: 7 debar (7 kp/cm²)
- Weight, on the outside of hose down, mist over lubricator and leaf blade: 21.6 lbs (9.8 kg)
The Partner K40 is a strong, extremely hale and dependable productive force cutters. Their plan is based on the Partner construct because ergonomics, refuge and efficiency. Being pneumatic-powered makes the Partner K30 and K40 hone tools on this account that indoor habituate, or
|